The AD823ARZ is a Dual 16MHz Rail-to-rail FET Input Amplifier that can operate from a single supply of 3 to 36V or from dual supplies of ±1.5 to ±18V. It has true single-supply capability with an input voltage range extending below ground in single-supply mode. Output voltage swing extends to within 50mV of each rail for IOUT <=100μA, providing outstanding output dynamic range. The amplifier drives up to 500pF of direct capacitive load as a follower and provides an output current of 15mA, 0.5V from the supply rails. This allows the amplifier to handle a wide range of load conditions. This combination of AC and DC performance plus the outstanding load drive capability, results in an exceptionally versatile amplifier for applications such as A/D drivers, high speed active filters and other low voltage, high dynamic range systems.
Output swings rail-to-rail
Input voltage range extends below ground
Single-supply capability from 3 to 36V
500pF Capacitive load drive
Excellent AC performance on 2.6mA/amplifier
350ns Settling time to 0.01% (2V step)
Good DC performance
800μV Maximum input offset voltage
2μV/°C Offset voltage drift
25pA Maximum input bias current
Low distortion
16nV/√Hz Noise at 10kHz
No phase inversion with inputs to the supply rails