The ADP1741-EVALZ is an evaluation board for the ADP1741. The ADP1741 evaluation board is used to demonstrate the functionality of the ADP1741 series of linear regulators. Simple device measurements, such as line and load regulation, dropout, and ground current, can be demonstrated with just a single voltage supply, a voltmeter, a current meter, and load resistors. The ADP1741 evaluation boards are shipped with different components depending on which version is ordered. ADP1741 are CMOS, low dropout linear regulators that operate from 1.6V to 3.6V and provide up to 2A of output current. These Low VIN/VOUT LDO's are ideal for regulation of nanometer FPGA geometries operating from 2.5V down to 1.8V I/O rails, and powering core voltages down to 0.75V. Using an advanced proprietary architecture, they provide high power supply rejection, low noise, and achieve excellent line and load transient response with just a small 4.7μF ceramic output capacitor.
- Input voltage range of 1.6V to 3.6V
- Output current range of 500μA to 2A
- Output voltage accuracy of ±2%
- Operating temperature range of -40°C to +125°C
- Maximum output current of 2A
- Low shutdown current of <2μA
- Low dropout voltage of 160mV @ 2A load
- Accuracy over line, load, and temperature of ±2%
- Adjustable output voltage options with soft start of 0.75V to 3V
- Excellent load and line transient response
消费电子产品, 通信与网络, 电源管理, 传感与仪器
