The OP37GSZ is a Low Noise Precision High Speed Operational Amplifier optimized for circuits with gains greater than five. This design change increases slew rate to 17V/ms and gain-bandwidth product to 63MHz. It provides the low offset and drift of the OP07 plus higher speed and lower noise. Offsets down to 25μV and a maximum drift of 0.6μV/°C make it ideal for precision instrumentation applications. The low input bias current of 10nA and offset current of 7nA are achieved by using a bias-current cancellation circuit. The output stage has good load driving capability. A guaranteed swing of 10V into 600W and low output distortion make the OP37 an excellent choice for professional audio applications. These characteristics, coupled with long-term drift of 0.2mV/month, allow the circuit designer to achieve performance levels previously attained only by discrete designs. High-volume production of the OP37 is achieved by using on-chip zener-zap trimming.
- Low noise (80nVp-p (0.1 to 10Hz), 3nV/√Hz at 1kHz)
- Low drift (0.2μV/°C)
- High speed
- Low input offset voltage (10μV)
- Excellent CMRR (126dB)
- High open-loop gain (1.8 million)
- Available in die form
音频, 微波, 信号处理, 传感与仪器, 测试与测量
(EN)
