The A000068 is a Arduino Ethernet Rev3 development board without PoE based on ATmega328 MCU. The Arduino Ethernet is a microcontroller board based on the Arduino Uno and incorporating a WizNet W5100 TCP/IP embedded Ethernet controller. It can be programmed like an Uno via a six pin FTDI style serial connector. The Arduino USB to serial adapter or any FTDI style USB to serial connector can be used to program it. A separate power over Ethernet (PoE) module can be soldered to the board to provide power from a conventional twisted pair category 5 Ethernet cable. It is IEEE802.3af compliant and works with all compliant PoE injectors currently available.
- Stronger RESET circuit
- 1.0 pinout
- 5V operating voltage
- Input voltage (recommended) range from 7V to 12V
- Input Voltage (limit) range from 6V to 20V
- 14 digital I/O pins
- 4 PWM digital I/O pins
- 32KB flash memory
- 1KB EEPROM
- 2KB SRAM
通信与网络, 建筑自动化, 工业, 自动化与过程控制, 传感与仪器
(EN)
