The LT1073CS8#PBF is a versatile micropower DC/DC Converter requires only three external components to deliver a fixed output of 5 or 12V. The very low minimum supply voltage of 1V allows the use of the LT1073 in applications where the primary power source is a single cell. An on-chip auxiliary gain block can function as a low-battery detector or linear post-regulator. Average current drain of the LT1073-5 used as shown in the typical application circuit below is just 135μA unloaded, making it ideal for applications where long battery life is important. The circuit shown can deliver 5V at 40mA from an input as low as 1.25V and 5V at 10mA from a 1V input. The device can easily be configured as a step-up or step-down converter, although for most step-down applications or input sources greater than 3V, the LT1173 is recommended.
No design required
Consumes only 95μA supply current
Works in step-up or step-down mode
Only three external off-the-shelf components required