The LT3680EMSE#PBF is an Adjustable 2.4MHz Step-Down Monolithic Switching Regulator with 75μA quiescent current that accepts input voltages up to 36V. A high efficiency 95mR switch is included on the die along with a boost Schottky diode and the necessary oscillator, control and logic circuitry. Current mode topology is used for fast transient response and good loop stability. Low ripple Burst Mode? operation maintains high efficiency at low output currents while keeping output ripple below 15mV in a typical application. In addition, the LT3680 can further enhance low output current efficiency by drawing bias current from the output when VOUT is above 3V. Shutdown reduces input supply current to less than 1μA while a resistor and capacitor on the RUN/SS pin provide a controlled output voltage ramp (soft-start). A power good flag signals when VOUT reaches 91% of the programmed output voltage.
Low ripple (<15mVP-P) Burst Mode? operation (IQ = 75μA at 12VIN to 3.3VOUT)