The LTC2485IDD#PBF is a 24-bit delta-sigma A/D Converter with easy drive input current cancellation and I2C interface. The patented sampling scheme eliminates dynamic input current errors and the shortcomings of on-chip buffering through automatic cancellation of differential input current. This allows large external source impedances and input signals with rail-to-rail input range to be directly digitized while maintaining exceptional DC accuracy. The LTC2485 includes an on-chip oscillator and can be configured through an I2C interface to reject line frequencies. 50, 60 or simultaneous 50/60Hz line frequency rejection can be selected as well as a 2x speed-up mode. The reference can be as low as 100mV or can be tied directly to VCC. This includes an on-chip trimmed oscillator eliminating the need for external crystals or oscillators. Absolute accuracy and low drift are automatically maintained through continuous, transparent, offset and full-scale calibration.
- Easy Drive? technology enables rail-to-rail inputs with zero differential input current
- Directly digitizes high impedance sensors with full accuracy
- GND to VCC Input/reference common mode range
- 2-wire I2C interface
- Programmable 50, 60Hz or simultaneous 50/60Hz rejection mode
- 2ppm (0.25LSB) INL, no missing codes
- 1ppm offset and 15ppm full-scale error
- Selectable 2x speed mode
- No latency, digital filter settles in a single cycle
- Internal oscillator
- Six addresses and one global address for synchronization
传感与仪器, 测试与测量, 工业, 自动化与过程控制
(EN)
