The MAX1112CAP+ is a +5V low power, multichannel, serial 8bit analogue to digital converter (ADC) in 20 pin SSOP package. This ADC uses a successive approximation conversion technique and input track/hold (T/H) circuitry to convert an analogue signal to an 8bit digital output. A flexible serial interface provides easy interface to microprocessors (μPs). Successive approximation conversion is performed using either internal clock or an external serial interface clock. The full scale analogue input range is determined by 4.096V internal reference or by an externally applied reference ranging from 1V to VDD. A serial strobe output provides end of conversion signal for interrupt driven processors. It features 2μA automatic power-down mode at software programmable to minimize power consumption. Using power-down, supply current is reduced to 13μA at 1ksps & 82μA at 10ksps. It is used in system diagnostics, solar powered remote systems & 4mA to 20mA powered remote data acquisition sys
Supply voltage range is 4.5V to 5.5V
Operating temperature range from 0°C to 70°C
8-channel single ended or 4-channel differential inputs
Low power of 135μA at 50Ksps
Internal track/hold, acquisition time of 1μs(min), external clock frequency of 50KHz(min)
SPI/QSPI/MICROWIRE compatible serial interface
Software-configurable unipolar or bipolar inputs
Total unadjusted error is ±1 LSB (max) and ±0.3 LSB (typ)
(EN)
