The MAX15501GTJ+ is an industrial analogue current/ voltage-output conditioner in 32 pin TQFN package. The analogue output conditioner provides a programmable current up to ±24mA or a voltage up to ±12V proportional to a control voltage signal. The control voltage is typically supplied by an external DAC with an output voltage range of 0 to 2.5V for the MAX15501. The output current and voltage are selectable as either unipolar or bipolar. In the unipolar configuration, a control voltage of 5% full-scale (FS) produces a nominal output of 0A or 0V to achieve under range capability. A control voltage of 100%FS produces one of two programmable levels (105%FS or 120%FS) to achieve over range capability. The outputs of the MAX15501 is protected against overcurrent conditions and a short to ground or supply voltages up to ±35V. The supply brownout threshold is programmable. The MAX15501 is a programmed through an SPIK interface capable of daisy-chained operation.
Supply voltage range is 15V to 32.5V
Operating temperature range from -40°C to 105°C
Current output drives 0 to 1kohm
Voltage output drives loads down to 1kohm
HART compliant
2ppm gain error drift over temperature
SPI interface with daisy-chain capability
Short circuit and overcurrent protection, open-circuit detection, brownout detection