The MAX4534CUD+ is a fault protected, high voltage, single 4 to 1 multiplexer in 14 pin TSSOP package. This multiplexer has fault protected inputs, rail to rail signal handling capability and overvoltage clamping at 150mV beyond the rails. The MAX4534 includes ±40V overvoltage protection with supplies off and ±25V protection with supplies ±15V supplies. The device has maximum on-resistance of 950 ohm and is matched between channels to 25ohm maximum at TA = +25°C with single +12V supply. All digital inputs have TTL logic thresholds ensuring TTL/CMOS logic compatibility when using a single +12V or dual ±15V supplies. It is typically used in data acquisition systems and redundant/backup systems.
Supply voltage range from 9V to 36V, ± 4.5V to ± 20V
Operating temperature range from 0°C to 70°C
Power supply sequencing is not required
All channels off with power off
Output clamped to appropriate supply voltage during fault condition
1Kohm typical output clamp resistance during overvoltage
Fault response time of 20ns and break before make time delay of 100ns with single +12V supply
COM Off leakage current of 2nA & COM on-leakage current of 2nA at TA = 25°C with single +12V supply
2pC charge injection, -62dB off isolation & -65dB crosstalk at TA = 25°C with single +12V supply
(EN)
