The MAX5822MEUA+ is a dual, 12bit, low power, 2-wire, serial voltage output DAC in 8 pin μMAX package. This DAC with an I2C-compatible, 2-wire interface operates at clock rates up to 400KHz. A power-down mode decreases current consumption to less than 1μA. The MAX5822 features three software-selectable power-down output impedances of 100Kohm, 1Kohm and high impedance. Other features include internal precision rail to rail output buffers and a power-on reset (POR) circuit that powers up the DAC in the 100Kohm power-down mode. It features a double-buffered I2C-compatible serial interface that allows multiple devices to share a single bus. All logic inputs are CMOS-logic compatible and buffered with Schmitt triggers allowing direct interfacing to optocoupled and transformer-isolated interfaces. The MAX5822 minimizes digital noise feed through by disconnecting the clock (SCL) signal from the rest of the device when an address mismatch is detected.
Supply voltage range is 2.7V to 5.5V
Operating temperature range from -40°C to 85°C
Ultra low supply current of 115μA at VDD = 3.6V and 135μA at VDD = 5.5V
±2LSB integral nonlinearity and ±1LSB differential nonlinearity
(EN)
