The 23LC1024-I/ST is a 1Mb SPI Serial SRAM with SDI and SQI interface. The memory is accessed via a simple serial peripheral interface (SPI) compatible serial bus. The bus signals required are a clock input (SCK) plus separate data in (SI) and data out (SO) lines. Access to the device is controlled through a chip select (CS) input. Additionally, SDI (serial dual interface) and SQI (serial quad interface) is supported if application needs faster data rates. This device also supports unlimited reads and writes to the memory array. It may also interface with microcontrollers that do not have a built-in SPI port by using discrete I/O lines programmed properly in firmware to match the SPI protocol.
SPI-compatible bus interface - 20MHz clock rate, SPI/SDI/SQI mode
Low-power CMOS technology
3mA at 5.5V, 20MHz Read current
4μA at +85°C Standby current
Unlimited read and write cycles
Zero write time
32-byte page
Byte, page and sequential mode for reads and writes