The DV330021是一个dsPICDEM MCSM 开发电路板套件targeted to 控制both unipolar和bipolar stepper motors in open loop or closed loop (current 控制) mode. The 硬件 设计in such a way that no 硬件 changes are necessary 用于8 wire, 6 wire or 4 wire stepper motors in either bipolar or unipolar 配置s. 软件to run motors in open loop or closed loop with full or variable micro stepping is provided. A GUID 用于控制ling step commands, motor parameter input和operation modes is included. This flexible和cost effective电路板 can be configured in different ways 用于use with specialized dsPIC33F motor 控制数字信号控制器 (DSCs). The dspICDEM MCSM 开发电路板 offers a mounting option to connect either a 28引脚SOIC设备or gneric 100 pin插入模块 (PIM).
- UART经USB 通讯
- 运动控制接口
- 内置15V电源, 最大功率11W
- 内置3.3V电源, 最大功率2W
- LED PWM输出指示器 全桥模式
- ICSP连接器用于编程PIC18LF2450 USB至UART桥接
- LED过流指示器
- 辅助电源插片式fast-on连接器 用于功率级
电机驱动与控制, 嵌入式设计与开发
(EN)
