The NPH15S series DC/DC Converter combines ease of application with versatility. The pin pattern is based on the popular industry standard, but two additional pins may optionally be fitted to provide a variety of features not commonly found on units of this type. High efficiency enables full rating to be achieved without heat-sinking and a high surge capability will provide for start-up and transient loads, whilst being thermally protected against sustained overload. Overload protection of the constant current type ensures start-up into complex load conditions. The copper case achieves efficient heat transfer and screening. The product range has been recognized by Underwriters Laboratory (UL) to UL 1950 for operational insulation, file number E151252 applies.
Industry standard pin-out
Non latching current limit
Operation to zero load
Protected against load faults
Internal over temperature protection
Uses no electrolytic capacitors
89% High efficiency
Up to 2.4W/cm3 power density
Constant 350kHz frequency
1.5kV input to output isolation
Continuous rating to 30W at 40°C without heat sink
