The SC16C550BIB48 is an Universal Asynchronous Receiver and Transmitter (UART) used for serial data communications. Its principal function is to convert parallel data into serial data and vice versa. The UART can handle serial data rates up to 3Mbps. The SC16C550B is pin compatible with the ST16C550, TL16C550 and PC16C550 and it will power-up to be functionally equivalent to the 16C450. It also provides DMA mode data transfers through FIFO trigger levels and the TXRDY and RXRDY signals. On-board status registers provide the user with error indications, operational status and modem interface control. System interrupts may be tailored to meet user requirements. An internal loopback capability allows on-board diagnostics.
Capable of running with all existing generic 16C450 software
Industrial temperature range operation
16-byte Transmit FIFO
16-byte receive FIFO with error flags
Programmable Auto-RTS\ and Auto-CTS\
Auto-CTS\ mode, CTS\ controls transmitter
Auto-RTS mode, RX FIFO contents and threshold control RTS
Automatic hardware flow control
Software selectable baud rate generator
Four selectable receive FIFO interrupt trigger levels
Standard modem interface
Standard asynchronous error and framing bits
Independent Receiver Clock Input
Transmit, receive, line status and data set interrupts independently controlled
False start-bit detection
Complete status reporting capabilities
3-state Output TTL drive capabilities for bidirectional data bus and control bus
Line break detection and generation
Loopback controls for communications link fault isolation
(EN)
