The H3CR-F series solid-state Twin Timer comes with the wide power supply ranges of high voltage 100 to 240VAC/100 to 125VDC and low voltage 24 to 48VAC/12 to 48VDC. This series offers twenty-four time ranges from 0.05 seconds to 300 hours depending on the model to be used. Models with a flicker ON start or flicker OFF start are available. Easy sequence checks through instantaneous outputs for a zero set value at any time range. ON and OFF times can be set independently and so combinations of long ON or OFF time and short OFF or ON time settings are possible. It features 80mm or less length, when panel-mounted with a socket. This series is conforms to EN61812-1 and EN60664-1 (VDE0110) 4 kV/2 standard. It enables easy sequence checks through instantaneous outputs for a zero set value at any time range. The time setting rings enable consistent settings and limit the setting range.
Lloyds/NK approvals
A wide range of applications through six or four operating modes
Reduced power consumption
Panel covers enable various panel designs
PNP input models available
Rich variety of inputs - Start, reset and gate functions (11-pin models and AP models)