The CDCEL913PW is a 1-PLL programmable VCXO Clock Synthesizer with 1.8V LVCMOS outputs. It generates up to three output clocks from a single input frequency. Each output can be programmed in-system for any clock frequency up to 230MHz, using the integrated configurable PLL. It has separate output supply pins, VDDOUT. The input accepts an external crystal or LVCMOS clock signal. A selectable on-chip VCXO allows synchronization of the output frequency to an external control signal. The PLL supports SSC (spread-spectrum clocking) for better electromagnetic interference (EMI) performance. The device supports non-volatile EEPROM programming for easy customization of the device to the application. The settings are programmable through the SDA/SCL bus, a 2-wire serial interface.
- Member of programmable clock generator
- Flexible clock driver
- Programmable SSC modulation
- Enables 0-PPM clock generation
- Generates common clock frequencies used with Texas Instruments DaVinci, OMAP and DSPs
- Serial programmable volatile register
- Non-volatile EEPROM to store customer settings
- PLL loop filter components integrated
- Green product and no Sb/Br
消费电子产品, 便携式器材, 音频, 成像, 视频和目视
(EN)
