The ISO7820FDWW is a high-performance, dual-channel digital isolator with 8000 VPK isolation voltage in 16 pin SOIC package. This device has reinforced isolation certifications according to VDE, CSA, CQC and TUV. It provides high electromagnetic immunity and low emissions at low power consumption, while isolating CMOS or LVCMOS digital I/O's. Each isolation channel has a logic input and output buffer separated by silicon dioxide insulation barrier. ISO7820 has two forward channels and no reverse-direction channel. If the input power or signal is lost, default output is 'low' for the ISO7820F device. Used in conjunction with isolated power supplies, it prevents noise currents on a data bus or other circuits from entering the local ground and interfering with or damaging sensitive circuitry. Through innovative chip design and layout techniques, electromagnetic compatibility of ISO7820 has been significantly enhanced to ease system-level ESD, EFT, surge and emissions compliance.
- Wide supply voltage range from 2.25V to 5.5V
- 2.25V to 5.5V level translation
- Signalling rate up to 100Mbps
- Low power consumption, typical 1.7mA per channel at 1Mbps
- Low propagation delay of 11ns typical (5V supplies)
- Industry leading CMTI(min) is ±100KV/μs
- Isolation barrier life is greater than 25years
- 5.7KVRMS isolation for 1minute per UL 1577
- CSA component acceptance notice 5A, IEC60950-1 and IEC 60601-1 end equipment standards
- Operating temperature range from -55°C to 125°C
通信与网络, 电机驱动与控制, 电源管理, 工业, 自动化与过程控制