The MAX213IDBR is a RS-232 multichannel Line Driver/Receiver consists of four line drivers, five line receivers and a dual charge-pump circuit with ±15kV ESD protection pin-to-pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signalling rates up to 120kbps and a maximum of 30V/μs driver output slew rate. The MAX213 has an active-low shutdown (SHDN) and an active-high enable control (EN). In shutdown mode, the charge pumps are turned off, V+ is pulled down to VCC, V- is pulled to GND and the transmitter outputs are disabled. This reduces supply current typically to 1μA. Two receivers of the MAX213 are active during shutdown.
- Designed to be interchangeable with Maxim MAX213
- Latch-up performance exceeds 100mA per JESD 78, class II
- 15μA Typical low supply current in shutdown mode
- 4 x 0.1μF External capacitors
- Green product and no Sb/Br
便携式器材, 计算机和计算机周边