The PCF8575CDBE4 is a 16-bit I/O Expander for the two-line bidirectional bus (I2C) is designed for 4.5 to 5.5V VCC operation. The PCF8575C provides general-purpose remote I/O expansion for most microcontroller families via the I2C interface serial clock (SCL) and serial data (SDA). The device features a 16-bit quasi-bidirectional input/output (I/O) port (P07-P00, P17-P10), including latched outputs with high-current drive capability for directly driving LEDs. Each quasi-bidirectional I/O can be used as an input or output without the use of a data-direction control signal. At power on, the I/Os are in 3-state mode. The strong pull-up to VCC allows fast-rising edges into heavily loaded outputs. This device turns on when an output is written high and is switched off by the negative edge of SCL. The I/Os should be high before being used as inputs. After power on, as all the I/Os are set to 3-state, all of them can be used as inputs.
- Open-drain interrupt output
- Compatible with most microcontrollers
- 400kHz Fast I2C bus
- Address by 3 hardware address pins for use of up to 8 devices
- Latched outputs with high-current drive capability for directly driving LEDs
- Latch-up performance exceeds 100mA per JESD 78, class II
- 10μA Maximum low standby-current consumption
- Green product and no Sb/Br
自动化与过程控制, 工业, 通信与网络, 消费电子产品, 计算机和计算机周边
(EN)
