The SN65HVD233DG4 is a CAN (Controller Area Network) transceiver with standby and loopback mode in 8 pin SOIC package. This CAN transceiver is used in applications employing CAN serial communication physical layer in accordance with the ISO 11898-2 standard. The SN65HVD233 provides transmit and receive capability between differential CAN bus and CAN controller with signalling rates up to 1Mbps. The SN65HVD233 features cross wire protection, overvoltage protection up to ±36V, loss of ground protection, overtemperature (thermal shutdown) protection and common mode transient protection of ±100V. The device operates over a wide -7V to 12V common mode range. The SN65HVD233 enter a low current standby mode during which the driver is switched off and receiver remains active if a high logic level is applied to the RS pin. A logic high on loopback (LBK) pin (pin 5) of SN65HVD233 places bus output and bus input in a high impedance state.
- Single 3.3V supply voltage
- Bus pins fault protection exceeds ±36V
- Bus pin ESD protection exceeds ±16KV HBM
- GIFT/ICT compliant
- High input impedance allows for 120 nodes
- Adjustable driver transition times for improved emissions performance
- Unpowered node does not disturb bus
- Low current standby mode of typically 200μA
- Operating temperature range -40°C to 125°C
- LVTTL I/Os are 5V tolerant
车用, 工业, 自动化与过程控制, 传感与仪器, 电机驱动与控制, 机器人, 通信与网络