TL598CN - 

制造商：

TEXAS INSTRUMENTS TEXAS INSTRUMENTS

制造商产品编号：

TL598CN

仓库库存编号：

1287657

技术数据表：

(EN)

The TL598CN is a Pulse Width Modulation (PWM) Controller on a single chip. Designed primarily for power-supply control, provides the systems engineer with the flexibility to tailor the power-supply control circuits to a specific application. The TL598 contains two error amplifiers, an internal oscillator (externally adjustable), a dead-time control (DTC) comparator, a pulse-steering flip-flop, a 5-V precision reference, undervoltage lockout control and output control circuits. Two totem-pole outputs provide exceptional rise- and fall-time performance for power FET control. The outputs share a common source supply and common power ground terminals, which allow system designers to eliminate errors caused by high current-induced voltage drops and common-mode noise. The error amplifier has a common-mode voltage range of 0V to VCC - 2V. The DTC comparator has a fixed offset that prevents overlap of the outputs during push-pull operation.

• Complete PWM power-control function
• Output control selects parallel or push-pull operation
• Internal circuitry prohibits double pulse at either output
• Variable dead-time provides control over total range
• Onboard output current-limiting protection
• Undervoltage lockout for low VCC conditions
• Separate power and signal grounds
• Adjustable switching frequency
• Error amplifier

参考价格及参考库存