The TPS62080EVM-641 is an evaluation module for TPS62080, 1.2A, high efficiency, step down converter. The TPS6208x focuses on high efficiency, step down conversion over a wide output current range. At medium to heavy loads, the converter operates in PWM mode and automatically enters PFM or power Save mode operation at light load currents to maintain high efficiency over the entire load current range. To maintain high efficiency at very low load or no load currents, a snooze mode with an ultralow quiescent current (5μA) is implemented, which maintains the output voltage. This function increases the run time of battery driven applications and keeps the standby current at its lowest level to meet green energy standards targeting for a low standby current. To address the requirements of powering supply rails, the internal compensation circuit allows a large selection of external output capacitor values ranging from 10μF up to 100μF.
- DCS control architecture for fast transient regulation
- Snooze mode for 5.5μA ultra low quiescent current
- Input voltage range is from 2.3V to 6.0V
- Supports high output capacitance up to 100μF
- 100% duty cycle for lowest dropout
- As the load current decreases the TPS62080 will enter the power save mode operation
- Output discharge function
- Short circuit protection option
- TPS62080 has a power good output going low when the output voltage is below its nominal value
- Thermal shutdown protection
电源管理, 便携式器材
(EN)
