The TS3USB221AEVM is an evaluation module for TS3USB221A the high speed USB 2.0 (480Mbps) 1:2 multiplexer/demultiplexer switch. It is specially designed for high speed USB 2.0 signals, supports bidirectional signalling, and offers high bandwidth (1.1GHz). When interfacing other USB devices with this evaluation module, the switch allows signals to pass with minimum edge and phase distortion as well as little or no signal attenuation. This evaluation module is designed to demonstrate the small printed circuit board areas that can be achieved when designing with the TS3USB221/A/E USB switches. It is powered from the 5V rail of the USB input. Additionally, the TS3USB221/A/E provides an output enable input and an output select input for flexible configuration of the USB.
- VCC operation at 2.5V and 3.3V
- VI/O accepts signals up to 5.5V
- 1.8V compatible control pin inputs
- Low power mode when OE Is disabled (1mA)
- Low power consumption (30mA maximum)
- High bandwidth (900MHz typical)
- ESD performance tested per JESD 22 7000V human body model (HBM)
- ESD performance I/O to GND 12000V human body model (HBM)
通信与网络, 无线, 消费电子产品, 成像, 视频和目视, 便携式器材
(EN)
