The A4935KJP-T is a 3-phase Motor Driver for use with N-channel external power MOSFETs. Unique charge pump regulator provides full (>10V) gate drive for battery voltages down to 7V and allows the A4935 to operate with a reduced gate drive, down to 5.5V. A bootstrap capacitor is used to provide the above-battery supply voltage required for N-channel MOSFETs. An internal charge pump for the high-side drive allows DC (100% duty cycle) operation. Full control over all six power FETs in the 3-phase bridge is provided, allowing motors to be driven with block commutation or sinusoidal excitation. The power FETs are protected from shoot-through by integrated crossover control and resistor-adjustable dead time. Bridge current can be measured using an integrated current sense amplifier. This is an uncommitted differential amplifier with a below-ground common mode range allowing it to be used in low-side current sense applications. Gain and offset are defined by external resistors.
Cross-conduction protection with adjustable dead time
(EN)
