The XR28V384IM48-F is a quad Universal Asynchronous Receiver and Transmitter (UART) for the Intel low pin count (LPC) bus interface. This device can replace or supplement a super I/O device to add additional serial ports to the system. The V384 UARTs support any 16-bit I/O address supported by the system. The register set is based on the industry standard 16550 UART, so the V384 operates with the standard serial port drivers without requiring a custom driver to be installed. The 128 byte Transmit and Receive FIFOs reduce CPU overhead and minimize the chance of buffer overflow and data loss. In addition to the 16550 UART registers, there are also configuration register set where enhanced features such as the 9-bit (multidrop) mode, IrDA mode and the watchdog timer can be enabled.
- 128-byte Transmit and receive FIFO
- 4 Independent UART channels
- Programmable I/O mapped base addresses
- Data rates up to 3Mbps
- Selectable RX FIFO interrupt trigger levels
- Auto RS-485 half-duplex control mode
- 5V Tolerant inputs
- Watchdog timer with WDTOUT# signal
工业, 自动化与过程控制, 通信与网络, 嵌入式设计与开发, 计算机和计算机周边
