ISO3086TDW - 

制造商：

TEXAS INSTRUMENTS TEXAS INSTRUMENTS

制造商产品编号：

ISO3086TDW

仓库库存编号：

2057088

技术数据表：

(EN)

The ISO3086TDW is an isolated Differential Line Transceiver with integrated oscillator outputs that provide the primary voltage for an isolation transformer. The device is a full-duplex differential line transceiver for RS-485 and RS-422 applications that can easily be configured for half-duplex operation by connecting pin 11 to pin 14 and pin 12 to pin 13. It is ideal for long transmission lines since the ground loop is broken to allow for a much larger common-mode voltage range. The symmetrical isolation barrier of the device is tested to provide 4242VPK of isolation for 1 minute per VDE between the bus-line transceiver and the logic-level interface. Any cabled I/O can be subjected to electrical noise transients from various sources. These noise transients can cause damage to the transceiver and/or near-by sensitive circuitry if they are of sufficient magnitude and duration. It can significantly increase protection and reduce the risk of damage to expensive control circuits.

• Meets or exceeds TIA/EIA-485-A standard
• Signalling rate up to 20Mbps
• Thermal shutdown protection
• Failsafe receiver (bus open, bus shorted and bus idle)
• Logic inputs are 5V tolerant
• Bus-pin ESD protection
• 11kV HBM Between bus-pins and GND2
• 6kV HBM between bus-pins and GND1
• 7pF Typical low bus capacitance
• 50kV/μs Typical transient immunity

• Green product and no Sb/Br