The EVAL-ADF4350EB1Z is an evaluation board for fractional-N/integer-N PLL frequency synthesiser. The EVAL-ADF4350EB1Z is designed to evaluate the performance of the ADF4350 frequency synthesiser. It contains the ADF4350 synthesiser, a USB connector and related interface, a 25MHz TCXO reference source, SMA connectors for the RF outputs and reference signal plus headers for various signals and voltages. There is also a loop filter (35KHz) on board. A USB cable is included with the board to connect to a PC USB port. The ADF4350 allows implementation of fractional-N or integer-N phase locked loop (PLL) frequency synthesisers, if used with an external loop filter and external reference frequency. The ADF4350 has an integrated voltage controlled oscillator (VCO) with a fundamental output frequency ranging from 2200MHz to 4400MHz.
- Board featured with PLL, VCO, loop filter (35KHz)
- It has 25MHz TCXO reference, USB interface and voltage regulators
- Accompanying software allows control of synthesiser functions from a PC
- Choice of power supply via USB or external feeding
- Typical phase noise performance of -99dBc/Hz @ 1KHz offset from carrier
- Output frequency range of 137.5MHz to 4400MHz
- Fractional-N synthesiser and integer-N synthesiser
- Low phase noise VCO and programmable divide-by 1/2/4/8/16 output
- Programmable dual-modulus prescaler of 4/5 or 8/9
- 3 wire serial interface
无线, 测试与测量, 通信与网络, 时钟与计时
(EN)
