The LTC4309CDE#PBF is a 2-wire hot swappable Bus Buffer allows I/O card insertion into a live backplane without corruption of the data and clock busses. It provides bidirectional buffering, keeping the backplane and card capacitances isolated. Low offset and high VOL tolerance allows cascading of multiple devices on the clock and data busses. If SDAOUT or SCLOUT are low for 30ms, FAULT will pull low indicating a stuck bus low condition. If DISCEN is tied high, the buffer will automatically break the bus connection and generate up to 16 clock pulses and a stop bit in an attempt to free the bus. A connection will resume if the stuck bus is cleared. If DISCEN is connected to GND, the busses will remain connected with no clock or stop bit generation. ACC input enables rise-time accelerators for high capacitively loaded busses. During insertion, the SDA and SCL lines are precharged to 1V to minimize bus disturbances.
- Bidirectional buffer increases fanout
- 60mV Buffer offset independent of load
- Optional disconnect when bus is stuck low
- Prevents SDA and SCL corruption during live board insertion and removal from backplane
- READY open drain output
- FAULT Open drain output
- 1V Precharge on all SDA and SCL lines
- ±6kV Human body ESD ruggedness
通信与网络, 工业
(EN)
