The MCP39F511-E/MQ is a highly integrated Power-monitoring IC with calculation and energy accumulation. The complete single-phase power-monitoring IC designed for real-time measurement of input power for AC/DC power supplies and power distribution units. It includes dual-channel Delta-Sigma ADCs, a 16-bit calculation engine, EEPROM and a flexible 2-wire interface. An integrated low-drift voltage reference with 10ppm/°C in addition to 94.5dB of SINAD performance on each measurement channel allows for better than 0.1% accurate designs across a 4000:1 dynamic range.
Power Monitoring Accuracy capable of 0.1% error across 4000:1 dynamic range
Built-in calculations - Active, reactive, apparent power, line frequency and power factor
Dedicated zero crossing detection (ZCD) pin
Dedicated PWM output pin
Automatic event pin control through fast voltage surge detection
Fast calibration routines and simplified command protocol
10ppm/°C Typical low-drift internal voltage reference
512 Bytes user-accessible EEPROM through page read/write commands
