The MAX632ACPA+ is a CMOS fixed output step-up switching regulator in 8 pin DIP package. The +12V fixed output, step-up DC-DC converter for use in low power, high efficiency switching regulator applications. The only external components required are an output filter capacitor and a low cost inductor. Included on-chip are low power battery detection circuitry and a charge pump output for generating a negative voltage in dual supply applications. Though most simple used as fixed output regulator IC can also be set for other output voltages by adding an external voltage divider. It is used in minimum component, high efficiency DC-DC converters, rechargeable and primary battery power conversion, uninterruptable onboard power supplies and card level multiple power conversion.
Supply voltage range from 2V to 16.5V
Operating temperature range from 0°C to 70°C
Adjustable output with 2 resistors
Typical efficiency of 80%
Only 2 external components required
Charge pump for negative output
Typical operating current is 135μA
Typical line regulation of 0.08%Vout at +0.5Vout < +Vs < Vout
Typical load regulation of 0.2%Vout at Vs= 0.5Vout
